FUN 1 EO: 1.57 - Radiation Protection Tech.

FUN 1 EO: 1.57

1 / 6

In the SOP removal process for a Double Step-off Pad, what is done in the lower contaminated area?

Remove only outer shoe cover using same procedure as single SOP

Remove all outer protective clothing including shoe covers

Remove protective clothing except inner shoe covers and inner gloves

Pick up dosimetry/hard hat and proceed to the nearest frisking station

2 / 6

What is one of the primary purposes of step-off pads (SOP) in radiation control?

A platform for monitoring radiation levels

A location for storing contaminated material

A process for treating radioactive waste

A boundary of the contaminated area

3 / 6

What type of Step-off Pad should be used at the exit of Discrete Radioactive Particle (DRP) Areas?

A temporary Step-off Pad

A double Step-off Pad

A tacky Step-off Pad

A standard Step-off Pad

4 / 6

Where should step-off pads NOT be located?

In areas where a safety hazard may result, such as stairwells or elevators

In highly contaminated areas for effective control

Outside the refueling cavity for easy access

Near the boundary of the contaminated zone for accessibility

5 / 6

When are double step-off pads typically used?

For emergency evacuation from contaminated zones

For performing maintenance on radiation equipment

For Highly Contaminated Areas and Discrete Radioactive Particle Zones/Areas

For monitoring radiation levels in a low contaminated area

6 / 6

What is the correct sequence for SOP removal when using a Single Step-off Pad?

Pick up dosimetry, discard shoe covers, step onto SOP, remove protective clothing

Remove protective clothing, discard shoe covers, pick up dosimetry, step onto SOP

Step onto SOP, remove protective clothing, discard shoe covers, pick up dosimetry

Remove protective clothing, step onto SOP, discard shoe covers, pick up dosimetry

Your score is

PreviousFUN 1 EO: 1.57Next